Heartbleed Safe
More Info



We Accept





Or via PayPal

PayPal Logo
Home > Garden Irrigation > Tubing, Tools & Accessories

Tubing, Tools and Accessories

Tubing is one of the more obvious requirements of a garden watering system and on DIY Gardener we have both 4 mm micro tubing (to feed the emitters) and 13 mm irrigation pipe (to distribute the water where it's needed). Less obvious, until you come to do the installation, are the cutting and punching tools that make the job easy, and here we have the very simple (Key Punch and Pocket Punch) to make the hole for the emitting device, and the slightly more complex Punch ‘n Cut which can be used to cut the tube as well as punch the emitter holes.

In addition, we have plant ties, a pressure regulator to control the inlet pressure down to a level acceptable for drip irrigation, and multi-core cable for connecting solenoid valves to an irrigation controller.

Sort By:
Page of 1
Punch 'n' Cut Pocket Punch Key Punch™
Our Price: $19.91 (21.90 inc GST)
Our Price: $11.50 (12.65 inc GST)
Our Price: $1.41 (1.55 inc GST)
Punch 'n' Cut Pocket Punch Key Punchâ„¢
The Punch 'n Cut can be used to insert and remove an emitter as well as cut the poly pipe The Pocket Punch is an easy to use accessory tool for micro irrigation. It has a stainless steel punch tip for punching holes into supply tubing and is ideal for the home gardener. Creates holes for micro fittings and emitters in main tubing supply lines
Garden Ties Pk 20 Valve Wiring Cable Netafim 13 mm x 25 m Poly Tube
Our Price: $3.59 (3.95 inc GST)
Our Price: $16.23 (17.85 inc GST)
Our Price: $12.91 (14.20 inc GST)
Garden Ties Pk 20 Valve Wiring Cable Netafim 13 mm x 25 m Poly Tube
Easy to use, multi-purpose plant tie.  Reusable, UV stabilised and long lasting tie for all plant tying requirements. PVC sheathed, 5-core, 0.5mm diameter copper cable used to connect up to 4 solenoid valves and 24VAC automatic irrigation controllers. Flexible, UV resistant, low density polyethylene tubing designed for low pressure micro irrigation applications
4mm Flexible PPVC Tube - 25m Pressure Regulator 3/4" BSP/F x 3/4" BSP/M - 100 kPa Pressure Regulator 3/4" BSP/F x 3/4" BSP/M - 175 kPa
Our Price: $18.00 (19.80 inc GST)
Our Price: $11.50 (12.65 inc GST)
Our Price: $11.50 (12.65 inc GST)
4mm Flexible PPVC Tube - 25m Pressure Regulator 3/4" BSP/F x 3/4" BSP/M - 100 kPa Pressure Regulator 3/4" BSP/F x 3/4" BSP/M - 175 kPa
Manufactured from flexible PVC, this quality small bore tubing is used in garden irrigation systems to deliver water from the 13 mm poly pipe to the dripper or sprayer. Device to regulate the inlet pressure of a garden irrigation system down to a manageable 100 kPa outlet pressure.  Ideal for preventing micro irrigation systems blowing apart from too high pressure. Device to regulate the inlet pressure of a garden irrigation system down to a manageable 175 kPa outlet pressure.  Ideal for preventing drip and micro spray irrigation systems blowing apart from too high pressure.